Surface must be free from dirt, grease, oils and any other foreign substances. Any flakescof old paint or powdery residues must be scrapped off and cleaned thoroughly by sanding using an emery paper. Algae and fungus on walls to be removed by high pressure water wash or coir brush and apply Bio-Wash fungicidal solution if needed. Fill cracks with suitable crack filling chemicals prior to start the painting job.
Apply Prime on well-prepared surface. Apply suitable putty to remove the undulation on the surface. Once the putty dries sufficiently hard smoothen the surface by sanding with emery paper No. 320.
Stir the base and hardener parts separately before mix them together. Mix hardener gradually into the base container (not the reverse) under continuous stirring. Always mix the full quantity as supplied to avoid improper curing issues. A suitable power mixer is recommended for uniform mixing of the product. Continue the mixing for 3-5 minutes. Allow induction time of 10 minutes and then thin down to applicable consistency with required quantity of potable water. Mix thoroughly till the components become homogenous. Apply the paint liberally with paint brush followed by rollers. Apply 2-3 coats of DECOR STAINGUARD - 2K to achieve the desire opacity as well as finish, depending on the shades. Provide 4-5 hrs drying interval in between the coats.
Clean all tools and spillage of paint with water immediately after application.